Let’s face it: configuring a barcode scanner can be confusing. But with the right steps, it’s easier than you think. Follow this guide to set up your Zebra DataWedge quickly and start scanning with confidence.

If you prefer you can also watch the tutorial in video form on YouTube here:

How to configure Zebra DataWedge Barcode Scanner

 

Step 1: Open the DataWedge App

  • Start by launching the DataWedge app on your Zebra device.

Step 2: Select the Default Profile

  • In the app, select the "Profile 0 (default)" option.

Step 3: Enable Key Options

  • Once inside the Profile 0 (default) menu, ensure the following options are enabled/checked:

    1. Profile enabled

    2. Barcode input

    3. Hardware Trigger

Step 4: Configure Scanner Settings

  • Go to Configure scanner settings.

  • Click on Scan params.

  • Locate Decode Audio Feedback, change the setting to "None", and click OK.

Step 5: Adjust Keystroke Output Settings

  • Return to the Profile 0 (default) menu.

  • Scroll down to the Keystroke output section and click on Basic data formatting.

  • Enable/check the "Send ENTER key" option.

Step 6: Verify the Configuration

  • Exit the DataWedge app and return to the main screen of your device.

  • Open your product management application.

  • Navigate to the product section, scan a barcode, and ensure that the code is pasted correctly with the ENTER key automatically applied at the end.

Conclusion

In conclusion, a well-configured barcode scanner is a game-changer. With these steps, your Zebra DataWedge will be ready to go, helping you keep everything organized and your business operating without a hitch. For a detailed walkthrough, check out this helpful video tutorial:

How to configure Zebra DataWedge Barcode Scanner


Powrót do blogu