Setting up WiFi on a Zebra ZD420 printer can feel like a daunting task, especially with all the configuration menus. But don’t worry—this guide will break it down step by step, making it hassle-free.
If you prefer you can also watch the tutorial in video form on YouTube here:
How to Install WiFi Zebra ZD420
Step 1: Start the Installation
-
Open the Zebra Setup Utilities application.
-
Click on Install New Printer.
-
Click Next, then select Install Printer.
-
Wait a few seconds for the next menu to load.
Step 2: Select Your Printer
-
In the PrnInst - Selecting the Printer menu, look at the Printers section on the right.
-
Select ZDesigner ZD420-203dpi EPL, then click Next.
Step 3: Edit the Printer Name
-
In the Printer Name box, add "64 Zebra" before the existing printer name.
Step 4: Configure the Port
-
Click on Add Port, then click Next.
-
In the Advanced TCP/IP Port Configuration menu:
-
In the LAN box, type 192.168.22.64.
-
In the Printer Name or IP Address box, type 192.168.22.64.
-
Click OK, then click Next.
Step 5: Finalize the Installation
-
In the next menu, uncheck the box that says "Launch installation of Zebra Font Downloader Setup Wizard".
-
Click Finish to complete the setup.
Conclusion
Installing WiFi on your Zebra ZD420 doesn’t have to be overwhelming. Follow these steps to get your printer up and running. With your printer connected, you’ll be ready to go!
If you need more guidance, check out this video tutorial:
How to Install WiFi Zebra ZD420